French-designed, European-standard grey 806 piping — PN16, acid- and alkali-resistant, 50+ year service life, with the catalogue’s 95–120°C heat resistance stated for the system’s CPVC grade. Pipe (WP55), 1806 fittings, ball & pump valves, solvent cement and cutters from one factory, in one container. Made in our own facility for projects across 118+ countries.
The costliest mistake in UPVC pipe procurement is mixing brands and discovering on site that the ball valve or union doesn’t match the pipe grade. The 806 system removes that risk: every component is manufactured to the same PN16 rating and material grade, so you source one matched set from one factory.
Source one matched set from one factory. No mixing brands, no mismatched control fittings on site.
Grey pressure pipe in all nine sizes, Φ20×2.0 to Φ110×7.2 in 4 m lengths — acid & alkali resistant, 50+ year life.
Sockets, elbows, 45° elbows, equal & reduced tees, reducers, unions, adapters, plugs and pipe clips — the full connector range.
Single-union and double-union ball valves in matched material grade.
Pump valves for suction lines and pump inlets.
System-matched cold-weld adhesive (125 / 250 / 500 / 1000 ml) for reliable, leak-tight joints.
Clean, burr-free site preparation for accurate cold-weld jointing.
For hot-water risers, industrial process lines and aggressive media, the 806 system is engineered past the point where green PPR reaches its limit. We treat these as specs, not slogans — request the datasheet to verify each against your tender.
| Spec | 806 UPVC / CPVC | Green PPR (for reference) |
|---|---|---|
| Catalogue heat resistance stated for the CPVC grade of the 806 system, not for UPVC pipe on its own — a material property, not a continuous service rating at PN16 | 95–120°C | 70–95°C |
| Pressure rating | PN16 | PN20 (PPR) |
| Acid / alkali corrosion | Resistant | Limited |
| Typical service life | 50+ years | — |
| Best for | Hot water, chemical, fire, irrigation, drainage | Cold/hot potable, floor heating |
| Pipe sizes (OD × wall, mm) | 20×2.0 · 25×2.0 · 32×2.4 · 40×3.0 · 50×3.7 · 63×4.7 · 75×5.6 · 90×6.7 · 110×7.2 all nine, 4 m lengths — every figure from our catalogue | 20×2.8 · 25×3.5 · 32×4.4 only |
| Full size chart | Download the PDF · all lines compared | — |
| Carton quantities & pallet data | Coming soon | Coming soon |
Because pipe, fittings and valves all share the same material grade, the whole line resists the same temperature and media — there is no weak link at the control fittings. Full size chart and carton data: Coming soon — request the datasheet.
UPVC 806 pipe (WP55, PN16) and the full 1806 fitting family are moulded in our own plant, so socket tolerances and solvent-cement behaviour are matched across the system. Sizes 20–110 mm.
Shown: the most-ordered types. Full item numbers, dimensions and carton quantities are in the catalogue — request the PDF.
The 806 system’s temperature ceiling and corrosion resistance let one product family cover jobs that would otherwise need several materials.
Pressurized potable and service water at PN16, with matched fittings and valves.
Risers and distribution — this is the CPVC grade’s duty, not UPVC’s. Send us the temperature and pressure and we will name the grade.
Building and process drainage runs with a full range of couplings and reducers.
Sprinkler and hydrant feed lines where temperature and pressure margins matter.
UV- and media-tolerant field lines for durable, low-maintenance networks.
Acid/alkali process transfer where metal and standard water pipe corrode.
We control the mould, the raw material and the line, which is how the 806 system stays consistent from the first container to the reorder.
The 806 system is produced to European standards, and our credential portfolio spans the certifications project engineers ask for by name.
Portfolio also spans ISO TYPE-5, TSE, TZW, GOST-R, GS, EAC, UKTC, EPRE and Gold Plus Supplier. Certificate numbers, validity dates and covered product ranges: Coming soon — request the certificate pack so your engineer can match each cert to the tender spec.
Take the whole grey system — pipe, fittings, ball & pump valves, cement and cutters — in one container. Consistent material grade and certificates that clear customs, plus stable re-orders and regional protection.
PN16 pipe in all nine sizes with matched valves for fire, irrigation and chemical lines — and for hot-water risers, the CPVC grade of the system. Tender-ready certification and lead times that keep pace with your programme.
806 size chart, PN16 pressure data, the UPVC-vs-CPVC-vs-PPR temperature comparison and an MOQ & FOB quick-sheet — everything to quote an 806 project.
For the MEP contractor & industrial buyer — read this figure carefully, because it is the one most often misapplied on our own product line. Our catalogue states heat resistance of 95–120°C for the CPVC grade of the 806 system — not for UPVC pipe on its own, and not as a continuous service rating for a pressurised line at PN16. It is a material property. UPVC and CPVC are two different materials sold under one 806 system number, and for a hot line the answer is the CPVC grade. Send us the fluid temperature and the pressure and we will tell you which grade applies — or that neither does.
For the chemical & industrial buyer — yes. The 806 system is engineered for acid and alkali corrosion resistance, which is why it serves chemical, irrigation and aggressive-media lines where metal and standard pipe corrode. Pipe, fittings, ball valves and pump valves share one material grade, so the whole line resists the same media.
For the importer & distributor — the full 806 range ships as one matched set — PN16 pipe, fittings, single- and double-union ball valves, pump valves, solvent cement and pipe cutters — from one factory in one container. No mixing brands, no mismatched control fittings on site.
For the project procurement lead — production is to European standards, and the portfolio includes German SKZ, CE, WRAS, DVGW, ISO 9001/14001, SGS and Bureau Veritas. Certificate numbers and covered ranges are available on request so your engineer confirms tender compliance. Downloadable certificate library: Coming soon.
For the brand owner & distributor — yes, we offer low-MOQ private label on the 806 system with your brand on pipe print and packaging, French-designed and European-standard behind your label. Exact MOQ, trade terms and lead time: Coming soon — request current terms for your market.
Tell us your application (hot water, chemical, fire, irrigation, drainage), size range, target market and quantity. We’ll send the datasheet, MOQ, FOB pricing and the certificate pack.
Request a Quote